WEINIG HYDROMAT H23C

  • Angebot
    18193296
  • Datum
    2018-03-02
  • Status : Das Angebot wurde deaktiviert.

Produkt

Kategorietyp Fräs- und Hobelmaschinen
Kategorie Kehlmaschinen (Fräsmaschinen für drei- und vierseitige Bearbeitung)
Marke Weinig

Spezifikationen

Zustand des Produkts Gebraucht
Herstellungsdatum 2001
Volumen 1 - 1 Konvertieren
Beschreibung
- machine in stock
- after technical review
- very good condition
- year of production 2001

TECHNICAL PARAMETERS:

PLANER:
- planing width 230 mm
- planing height 180 mm
- diameter of spindles 50 mm

- maximum tool diameter 220 mm

- Feed speed up to 80 m / min
- feedrate adjustable on the inverter

1) Lower head 15 kW
2) head of law 11kW
3) left head 11 kW
4) upper head 11 kW
5) Upper head 18 kW
4) Lower head 22 kW

- electrically adjustable height
- electrically adjustable upper heads
- pneumatic clamps

- feed on cardan shafts
- five top steel rolls
- two rubber rollers
- four rolls in the pulling table

- auxiliary pressure at the left head
- the last two heads on the supports
- diameter 140 mm

ADMINISTRATION SYSTEM:
- the length of packages is 6100 mm
- width 1200 mm
- height 1300 mm
- the ability to stack two packets simultaneously
- decomposition
- brackets for narrow elements
- 2500 mm chain feeder
- pre-segregation of material
- transom feeder for planer 1500 mm
- hydraulic accelerator

RECEIVING SYSTEM:
- conveyor belt 7000 mm
- Transmission table, transverse 2100 mm
- Receiving rollers with 6000 mm drive
- Receiver rollers with drive and adjustable ejectors 7100 mm
- gravity rollers

The Weinig automatic planing line is a system that improves work efficiency while increasing efficiency. Such solutions are aimed at companies that introduce the process of automation of production plants. The planing process is handled by two people who are responsible for the initial material selection and pick up. The principle of operation of the lines is as follows, the material is delivered by forklift to a chain conveyor, which by its length will hold two packages at the same time. This directly affects the efficiency of the operation, because once the package has been unpacked, the operator can immediately place the next one in the right place, without stoppage due to not delivering the material by the forklift truck. The training system tilts the entire package and lifts it at the same time, releasing single layers that directly onto the chain feeder. The elements at this stage undergo preliminary selection for those suitable for planing and waste. The material that is not suitable for further processing is separated by an operator having a station at this stage, which by means of the button controls the rolls that break the continuity of the line, thereby reducing the material to the feeder and not reaching the planer. The material that has undergone segregation and is suitable for the next stage is passed through gravity rollers to another chain feeder. This feeder is equipped with a transverse rollers system and a hydraulic accelerator which is responsible for transferring parts from the feeder to the Weinig Hydromat H23C four-side planer. Then there is the process of planing the elements which has the possibility of processing them at speeds up to 80 m / min. The integrated picking system after the planing transfers them to a cross conveyor with a conveyor system equipped with an automatic material discharge system. At this stage the finished items are placed on lateral conveyors transporting them to the rollers. The material hit on rolls carried
These are the ejectors that push the material onto the gravity rollers where they are picked up by the worker. The line is the ideal solution for companies who appreciate the quality and effectiveness of the components. The planer is able to meet even the most demanding expectations, while the feeder and receiver system will only increase its efficiency.

https://www.youtube.com/watch?v=CVbNQ1znNYE

Preise & Konditionen

Preis Auf Anfrage
Verkauft bevorzugt in allen Ländern

Verkäufer

Es tut uns leid, dieses Angebot steht nicht mehr zur Verfügung. Aber das ist nicht tragisch! Bitte füllen Sie das Feld unten aus und Sie erhalten etliche ähnliche neue Geschäftsmöglichkeiten

 Ich bestätige, dass ich die Datenschutzerklärung von Fordaq gelesen und verstanden habe

Mit Ihrer Anmeldung erklären Sie sich mit Unseren AGB

Ähnliche Anzeigen anderer Mitglieder
Angebot 06 Mar 2024 12:33

Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Weinig Gebraucht

aus StanDrew Sp. z o.o. Sp. komandytowa
Angebot 20 Dec 2023 10:10

Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Weinig Gebraucht

aus Wood Solutions Maszyny Stolarskie
Angebot 10 Jan 2024 11:38

Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Leadermac Gebraucht

aus StanDrew Sp. z o.o. Sp. komandytowa
Angebot 10 Jan 2024 11:38

Kehlmaschinen (Fräsmaschinen Für Drei- Und Vierseitige Bearbeitung) Weinig Gebraucht

aus StanDrew Sp. z o.o. Sp. komandytowa
Das Fordaq Trust Rating setzt sich aus den überprüften Informationen über diese Firma zusammen. Alle Informationen über diese Firma werden von uns überprüft und Schrittweise erweitert. Je mehr Informationen wir verifizieren konnten, desto höher fällt das Rating aus.

Informationen aus welchen wir das Rating bilden:

  • Kontakte mit der Firma:
    Anzahl der telefonischen Kontakte, Vorort Besuche der Firma durch unsere Mitarbeiter und Treffen auf Messen.
  • Aktivitäten der Firma auf Fordaq
  • Verifizierte Zertifikate von anerkannten Dritt-Anbietern (FSC, PEFC, etc.)
  • Fordaq hat die Mitgliedschaft in einem anerkannten Verband positive überprüft.
  • Wurde die Firma von anderen Firmen empfohlen?